What Are DTF Transfers? (and How to Press Them)
Share
DTF (direct-to-film) transfers are full-color designs printed on a special film that you press onto fabric with heat. To apply one, press at 302°F (150°C) for 15 seconds with firm pressure, let it cool completely, then peel off the film. DTF works on cotton, polyester, and blends, on both light and dark fabrics, and lasts through 50+ washes with the right care.
In this article
What is a DTF transfer?
DTF stands for direct-to-film. Your design is printed onto a clear film, coated with an adhesive powder, and cured. When you heat-press the film onto fabric, the adhesive bonds the print to the fibers. Once it cools, you peel the film away and the design stays on the garment.
Because the design is printed on film first, DTF handles full color, gradients, and fine detail, on light or dark fabrics, in almost any size or shape.

What "ready to press" means
Our DTF transfers come ready to press: each design is already cut out, so you just place it on the garment and press. Order as many as you need, whether that's 10, 100, or more. There's no minimum.
How to press DTF transfers, step by step
| Setting | Value |
|---|---|
| Temperature | 302°F (150°C) |
| Time | 15 seconds |
| Pressure | Firm, about 40 psi |
| Peel | Cold peel (let it cool completely first) |
- Pre-press the garment for a few seconds to remove moisture and wrinkles.
- Place the transfer where you want it, design side down on the fabric. On hats or uneven surfaces, hold it in place with heat-resistant tape.
- Press at 302°F (150°C) for 15 seconds with firm pressure. Some fabrics need small adjustments, generally within 300–320°F and 10–15 seconds.
- Let it cool completely, then peel the film off slowly.
- Optional finishing press: cover the design with parchment paper and press again for a few seconds to set it.

Test first. Press one or two pieces before running a full batch, especially on a new fabric or a new press.
Hot peel or cold peel?
Our transfers are cold peel. Peeling while the transfer is still hot can lift the design. Wait until it's cool to the touch, then peel slowly.
Can I use a home iron?
Yes, a home iron works. A heat press gives the most even heat and pressure, so it's the better choice for batches, but most heat presses work, including small and handheld ones, as long as they reach the right temperature and pressure.
What fabrics do DTF transfers work on?
Cotton, polyester, and blends, on both light and dark colors. That covers T-shirts, hoodies, tote bags, hats, and most everyday garments. Pressing settings may need small adjustments depending on the fabric, so test one piece first.
How long do DTF transfers last?
They're built to last through 50+ washes without peeling, cracking, or fading when you follow these care steps:
- Turn the garment inside out.
- Wash in cold or warm water on a gentle cycle with mild detergent.
- Skip bleach and fabric softener.
- Air dry or tumble dry on low.
- Don't iron directly over the print.

DTF vs DTG vs screen printing
| DTF (direct-to-film) | DTG (direct-to-garment) | Screen printing | |
|---|---|---|---|
| How it works | Printed on film, then heat-pressed onto fabric | Ink printed straight onto the garment | Ink pushed through a screen, one color at a time |
| Fabrics | Cotton, polyester, blends | Best on cotton | Most fabrics |
| Dark fabrics | Yes | Usually needs pre-treatment | Yes |
| Full color and detail | Yes | Yes | Each color adds setup |
| Small runs | Good: no minimum, press when you need | Good | Best for larger runs of the same design |
| Stock now, press later | Yes | No | No |
The big advantage of DTF for small businesses, bands, and creators: you can order transfers once, keep them on hand, and press them onto blanks whenever you need, instead of printing finished garments in advance.
How to prepare your DTF file
- Send a PSD or PDF at 300 dpi at the size you want printed.
- Keep lines at least 0.3 mm thick and avoid very small text.
- Not sure your file is ready? Send what you have. Our designers check it and prepare it for free, and you'll approve a proof before we print.
More file tips: How to Prepare Artwork
Frequently asked questions
What temperature and time do I use for DTF transfers?
302°F (150°C) for 15 seconds with firm pressure, about 40 psi. Some fabrics need small adjustments within 300–320°F and 10–15 seconds.
Are your DTF transfers hot peel or cold peel?
Cold peel. Let the transfer cool completely, then peel the film slowly.
Can I apply DTF transfers with a home iron?
Yes. A heat press gives the most even results, but a home iron works too. Test on one or two pieces first.
How many washes do DTF transfers last?
50+ washes without peeling, cracking, or fading, when you wash inside out, on gentle, without bleach or fabric softener.
What's the difference between DTF and DTG?
DTG prints ink straight onto the garment and works best on cotton. DTF is printed on film first and pressed on, so it works on more fabrics and colors, and you can stock transfers to press later.
Is there a minimum order for DTF transfers?
No. Order as many as you need.
More answers: DTF Transfers FAQ
Ready to order?
Full-color, ready-to-press transfers for cotton, polyester, and blends, with no minimum. Not sure your file is ready? Our designers fix it for free.
Keep reading
In this article
Related articles

DTF Transfers
Band T-Shirt Design Ideas and How to Print Them


Sticker Uses
Wedding Stickers: Favors, Envelope Seals, and Signs
