Small Business

Car Door Decals for Business: What to Include and How Big to Go

By KAD Sticky Team · 2 min read

A good car door decal shows your business name, what you do, and one way to reach you, in letters big enough to read from across a parking lot. Many small businesses use one-color cut vinyl lettering for the name and phone number, plus a printed logo. Keep it to three or four lines, use high-contrast colors, and if your vehicle needs a USDOT number, check the federal marking rules before you design.

In this article

What to put on a car door decal

  1. Business name or logo: the biggest element.
  2. What you do: "Plumbing," "Mobile Pet Grooming," "Landscaping."
  3. One contact: a phone number or a short website. Not both if space is tight.
  4. Required numbers: a contractor license or USDOT number, if your trade or vehicle needs one.

How big should the letters be?

A common rule of thumb: about 1 inch of letter height for every 10 feet of reading distance.

Element Letter height Readable from about
Business name 3"–4" 30–40 feet
What you do 2"–3" 20–30 feet
Phone or website 2"–3" 20–30 feet

Diagram of car door decal letter sizes for the business name, service, and phone number

Decal, printed sticker, or magnet?

Option Good for Watch out for
Cut vinyl decal One-color names and numbers that look painted on One color per layer
Printed vinyl sticker Full-color logos A visible sticker edge
Door magnet Personal cars used for work, removable Can slide or fall off; usually removed for car washes

We make cut vinyl decals and printed stickers. We don't make car magnets.

Rules to check first

Commercial motor vehicles that need a USDOT number must show the legal or trade name and USDOT number on both sides, in a color that contrasts with the background, readable from 50 feet in daylight while the vehicle is parked. Some states and trades also require license numbers on work vehicles. Check FMCSA's marking rules and your state's requirements; we print what you design but can't give legal advice.

How to apply a door decal

  1. Wash the door, then wipe with rubbing alcohol.
  2. Tape the decal in place and check it's level from a few steps back.
  3. Hinge it from the top, flip it up, peel the backing, and squeegee from the hinge down.
  4. Peel the transfer tape slowly at a low angle. Skip the car wash for a day or two.

Vinyl Lettering: Custom Letter Decals for Windows, Cars, and Boats

Frequently asked questions

What should a business car door decal say?

The business name, what you do, and one way to contact you.

How big should car door lettering be?

About 3 to 4 inches for the business name, 2 to 3 inches for the phone number.

Do I need my USDOT number on my truck door?

If your vehicle is a commercial motor vehicle that needs a USDOT number, yes. Check FMCSA's marking rules.

Do you make car door magnets?

No. We make cut vinyl decals and printed vinyl stickers.

More answers: Cut Types FAQ

Ready to brand your work vehicle?

Send your logo, text, and the door measurements. We'll prepare the file for free and send a proof before anything prints.

Ask about door decals Shop custom vinyl stickers

Keep reading

Back to blog